[Elecraft] KX3 ATU Not Tuning
Kevin McQuiggin (SFU)
mcquiggi at sfu.ca
Sat Aug 10 16:35:54 EDT 2019
Low batteries can also prevent accurate ATU operation, in my experience. The ATU will do the best it can but can’t find a good match. Fresh batteries or a switch to external power will help.
73,
Kevin
Sent from my iPad
> On Aug 10, 2019, at 12:03, rich hurd WC3T <rich at wc3t.us> wrote:
>
> From what I’ve read, you have an open circuit to the antenna. Feedline
> okay? I had a marginal feedline and had to replace it.
>
> I also had a bad BNC cable that deformed the connector on the side of the
> KX3 and had to replace it as well.
>
>> On Sat, Aug 10, 2019 at 12:29 Aaron <k5atg.aaron at gmail.com> wrote:
>>
>> I have a KX3 with the ATU installed. I replaced the batteries and since
>> then the ATU will not tune. When I hit the ATU TUNE button it just says
>> 25.4-1 and I can hear the relays going off. I opened it back up and looked
>> for any cables not connected or anything and it looked all fine to me but I
>> could have missed something. It was working just fine before the battery
>> switch.
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to rich at wc3t.us
>>
> --
> 72,
> Rich Hurd / WC3T / DMR: 3142737
> Northampton County RACES, EPA-ARRL Public Information Officer for Scouting
> Latitude: 40.761621 Longitude: -75.288988 (40°45.68' N 75°17.33' W) Grid:
> *FN20is*
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to mcquiggi at sfu.ca
More information about the Elecraft
mailing list