[Elecraft] KX3 ATU Not Tuning

[rich hurd WC3T]

>From what I’ve read, you have an open circuit to the antenna.   Feedline
okay?   I had a marginal feedline and had to replace it.

I also had a bad BNC cable that deformed the connector on the side of the
KX3 and had to replace it as well.

On Sat, Aug 10, 2019 at 12:29 Aaron <k5atg.aaron at gmail.com> wrote:

> I have a KX3 with the ATU installed. I replaced the batteries and since
> then the ATU will not tune.  When I hit the ATU TUNE button it just says
> 25.4-1 and I can hear the relays going off. I opened it back up and looked
> for any cables not connected or anything and it looked all fine to me but I
> could have missed something.  It was working just fine before the battery
> switch.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rich at wc3t.us
>
-- 
72,
Rich Hurd / WC3T / DMR: 3142737
Northampton County RACES, EPA-ARRL Public Information Officer for Scouting
Latitude: 40.761621 Longitude: -75.288988  (40°45.68' N 75°17.33' W) Grid:
*FN20is*