[Elecraft] K2 - Lost 40m Tx after install of K60XV option

[Alan D. Wilcox]

Neil,
When you did initial setup of the K60XV, did you
set D19 to Yes?
Cheers,
Alan

Alan D. Wilcox, W3DVX
570-916-9590 (cell, text)
https://WilcoxEngineering.com
http://www.eham.net/reviews/detail/6768 ... Elecraft Client Comments
http://amazon.com/author/alandwilcox
Williamsport, PA 17701

> On Aug 5, 2019, at 19:43, Neil Zampella <neilz at techie.com> wrote:
> 
> Don,
> 
> I don't see 60M working either.    I'll check these tomorrow after work.
> 
> Neil
> 
> On 8/5/2019 2:20 PM, Don Wilhelm wrote:
>> Neil,
>> 
>> Does 60 meters work, but not 40 meters?
>> 
>> The only things that could 40 meters to fail after installing the
>> K60XV are:
>> 
>> 1) C6 is not the correct 4.7 pF value - it will be marked either 4.7
>> or 479.
>> 
>> 2) Relay K1 not working properly, check the orientation and soldering.
>> 3) P2 and/or RF J15 not installed properly.
>> 
>> 73,
>> Don W3FPR
>> 
>> On 8/5/2019 11:14 AM, Neil Zampella wrote:
>>> Hi all,
>>> 
>>> need some advice.   I have a K2, and it was working fine.   Then I put
>>> together the K60XV option and installed it.   Messed something up as 40M
>>> Tx went away.    The rig switches to Tx, but I do not see any power
>>> coming out of the system.
>>> 
>> 
> 
> ---
> This email has been checked for viruses by AVG.
> https://www.avg.com
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to alan at wilcoxengineering.com