[Elecraft] K2 - Lost 40m Tx after install of K60XV option

[Neil Zampella]

Don,

I don't see 60M working either.    I'll check these tomorrow after work.

Neil

On 8/5/2019 2:20 PM, Don Wilhelm wrote:
> Neil,
>
> Does 60 meters work, but not 40 meters?
>
> The only things that could 40 meters to fail after installing the
> K60XV are:
>
> 1) C6 is not the correct 4.7 pF value - it will be marked either 4.7
> or 479.
>
> 2) Relay K1 not working properly, check the orientation and soldering.
> 3) P2 and/or RF J15 not installed properly.
>
> 73,
> Don W3FPR
>
> On 8/5/2019 11:14 AM, Neil Zampella wrote:
>> Hi all,
>>
>> need some advice.   I have a K2, and it was working fine.   Then I put
>> together the K60XV option and installed it.   Messed something up as 40M
>> Tx went away.    The rig switches to Tx, but I do not see any power
>> coming out of the system.
>>
>

---
This email has been checked for viruses by AVG.
https://www.avg.com