[Elecraft] Suggested enhancements for K3

[Drew AF2Z]

I don't expect to see it for the K3 but perhaps someday a K4 will have a 
CW pitch adjustment that:

a) does not blank the received signals when you engage it as the current 
sidetone pitch adjustment does;

b) keeps the signal centered in the passband while pitch is adjusted, 
unlike when you adjust RIT or VFO to change a signal's pitch.

73,
Drew
AF2Z



On 04/04/19 20:19, Kidder, George wrote:
> Two suggestions which can probably be added in firmware for K3 and K3s:
> 
> 1)  Allow different audio levels for speaker and phones, such as an
> attenuation applicable to either.
> 
> 2)  Allow (but not require) the monitor level to be controlled along
> with the receiver levels.
> 
> If either is already available for the K3, someone please let me know!
> 
> 73 - George, W3HBM
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>