[Elecraft] K3S USB sound card -W7 pro

[Bob McGraw K4TAX]

Also, in the Windows 7 sound card  make sure your don't have Microphone 
Boost checked.    Forgot about that one.

73

Bob, K4TAX

On 4/3/2019 5:21 PM, Bob McGraw K4TAX wrote:
> If you go into the K3S CONFIG menu to LIN OUT the normal value is 
> 10.   I suggest you back this down to 5.  This will then allow the 
> Windows 7 Pro sound card slider to operate near mid range thus  0 dB 
> or 50% depending on how it is displayed.
>
> 73
>
> Bob, K4TAX
>
> On 4/3/2019 4:50 PM, HP wrote:
>> Is here any way in W7 to change the RX level when using the built in 
>> USB K3S sound card . The W7 slider
>> goes to -10dB with a lot of care but next tap is -192 dB- In WSJT 
>> this means I have LIN out set to 001 and
>> still a bit too high .?
>>
>> Hank K7HP
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>