[Elecraft] K3S USB sound card -W7 pro

[Bob McGraw K4TAX]

If you go into the K3S CONFIG menu to LIN OUT the normal value is 10.   
I suggest you back this down to 5.  This will then allow the Windows 7 
Pro sound card slider to operate near mid range thus  0 dB or 50% 
depending on how it is displayed.

73

Bob, K4TAX

On 4/3/2019 4:50 PM, HP wrote:
> Is here any way in W7 to change the RX level when using the built in USB K3S sound card . The W7 slider
> goes to -10dB with a lot of care but next tap is -192 dB- In WSJT this means I have LIN out set to 001 and
> still a bit too high .?
>
> Hank K7HP
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>