[Elecraft] FLDIGI with K3s

[Bill Frantz]

Does using Reverse on the K3 make it easier to use the logging software spots?

73 Bill AE6JV

On 4/2/19 at 4:11 PM, anyone1545 at gmail.com (Gmail) wrote:

> I recommend reading the FLDIGI manual.  It states that USB is used for 
> digital modes, including RTTY.  The K3 uses USB for Data A and LSB for Data 
> AFSK. 
> In my first contest I was having problems getting reliable decoding and not 
> many responses to my calls. I asked a friend who is an PVRC RTTY expert for 
> help. He monitored my transmission and determined my signal was reversed. He 
> said some operators would see that and change mode to answer me. Enabling Rv 
> (reverse) on the lower FLDIGI control panel solved problem. However my 
> logging software sends a mode command to radio when I select a spot and 
> change frequency and it turns off Rv. A better solution is Data A mode which 
> uses USB. 
> There may be a way to change the FLDIGI RTTY  default however I have not 
> found it in the menus. Has anyone found it?
> Ray
> W8LYJ 
---------------------------------------------------------------------------
Bill Frantz        | If you want total security, go to prison. There you're
408-356-8506       | fed, clothed, given medical care and so on. The only
www.pwpconsult.com | thing lacking is freedom. - Dwight D. Eisenhower