[Elecraft] FLDIGI with K3s

[Gmail]

I recommend reading the FLDIGI manual.  It states that USB is used for digital modes, including RTTY.  The K3 uses USB for Data A and LSB for Data AFSK. 
In my first contest I was having problems getting reliable decoding and not many responses to my calls. I asked a friend who is an PVRC RTTY expert for help. He monitored my transmission and determined my signal was reversed. He said some operators would see that and change mode to answer me. Enabling Rv (reverse) on the lower FLDIGI control panel solved problem. However my logging software sends a mode command to radio when I select a spot and change frequency and it turns off Rv. A better solution is Data A mode which uses USB. 
There may be a way to change the FLDIGI RTTY  default however I have not found it in the menus. Has anyone found it?
Ray
W8LYJ 

Sent from my iPad

> On Apr 2, 2019, at 17:18, Bob McGraw K4TAX <rmcgraw at blomand.net> wrote:
> 
> FLDIGI working under Windows 10 has no issues using the correct mode for AFSK or PSK. 
> 
> In FLDIGI you should be able to select PKTUSB for PSK mode and PKTLSB for AFSK.  
> 
> 
> 
> Bob, K4TAX
> 
> 
> Sent from my iPhone
> 
>> On Apr 2, 2019, at 3:47 PM, Gmail <anyone1545 at gmail.com> wrote:
>> 
>> It appears FLDIGI  MAC uses USB for RTTY not the standard LSB. Use data A for RTTY.  If AFSK is used FlDIGI needs to be in REV mode. 
>> If FLDIGI is not decoding correctly or no one answers calls, check the mode.
>> I don’t know if this applies to PC FLDIGI.
>> RAY
>> W8LYJ
>> Sent from my iPad
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> 
>