[Elecraft] No Tx Audio

[Bob McGraw K4TAX]

Check your MON level on your K3.   I run mine about 8 for digital 
modes.  I know nothing about the MicroHam DKII.   I just run the USB 
interface between the computer running the application software and the 
radio.    I only use 3 software applications, WSJT-X, HRD or FLDIGI.  
And with those, I run only one at a time. Logging is handled totally 
separate.

73

Bob, K4TAX



On 10/17/2018 1:46 PM, paul ecker via Elecraft wrote:
> Problem: Not hearing any audio during transmit in digital modes.I have a K3, Win 10 PC, with microHam DKII interface. When transmitting inRTTY, PSK31 or FT-8 I am not hearing any Tx audio, which I had been previously.  I first noticed this in RTTY when not hearingany diddles. But when using MMTTY – the K3 goes to Tx , I am getting power out and Iam being seen on the RTTY RBN. In PSK31 using WinWabler and FT-8 using WSJT-X, Iam making successful QSO’s. I have gone thru the DK II manual setup pages for theseprograms and cannot find errors in my setup. Not sure if this is a K3 issue or a Windows 10 problem. Anyone have any ideas on what might be wrong?
> 73Paulw2eck
>   
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net