[Elecraft] K3S and N1MM+ on cw with no interface

[Nr4c]

You need some sort of connection between the radio and computer. Simplest is the USB cable that came with your K3S. Set CONFIG/PTT/KEY to RTS DTR on the radio of in n1mm+ go to Configure and set the com port (from Win device manager “ports”) and set the radio and then set KEY  and PTT same as you did the radio. 

Sent from my iPhone
...nr4c. bill


> On Nov 22, 2018, at 11:46 AM, Jim Cary <jimlcary at gmail.com> wrote:
> 
> I’m trying to get my K3S and N1MM+ to work on cw without an interface (which I have used in the past).  I’ve tried a couple of the suggestions I’ve seen on  the reflector but none of them seem to work.
> 
> I’m sure someone has figured out an easy way to do this and would appreciate the info.
> 
> Thanks,
> 
> Jim
> W2SM
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com