[Elecraft] Data troubles

[Martin Sole]

Okay, but the K3 book states AFSK A mode can also be used for 
Audio-shift transmit, but is optimized for RTTY. Also the RTTY text 
decoder does not work in DATA A mode.

Martin, HS0ZED

On 20/11/2018 10:38, Bob McGraw K4TAX wrote:
> You should be operating in DATA A mode for AFSK as it is an audio data 
> mode.
>
> 73
>
> Bob, K4TAX
>
>
> On 11/19/2018 9:26 PM, Martin Sole wrote:
>> Can anyone help with a quick DATA mode problem.
>>
>> I've always used AFSK but it seems to have stopped working on 
>> transmit. I can set DATA A and then send audio from the PC into the 
>> radio. It transmits fine, no problem. Just switching to data mode 
>> AFSK and then sending audio. the vox operates as before but no 
>> modulation, no output.
>>
>> In summary, RX works fine both modes
>> TX works fine in DATA A
>> TX does not work other than trigering VOX in AFSK A.
>>
>> Nothing else changes other than the mode on the front panel. Line in, 
>> level all set the same.
>>
>> Figure I must be doing something dumb.
>>
>> Any help?
>>
>> Thanks
>> Martin, HS0ZED
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to rmcgraw at blomand.net
>>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to hs0zed at gmail.com