[Elecraft] Data troubles

[Bob McGraw K4TAX]

You should be operating in DATA A mode for AFSK as it is an audio data 
mode.

73

Bob, K4TAX


On 11/19/2018 9:26 PM, Martin Sole wrote:
> Can anyone help with a quick DATA mode problem.
>
> I've always used AFSK but it seems to have stopped working on 
> transmit. I can set DATA A and then send audio from the PC into the 
> radio. It transmits fine, no problem. Just switching to data mode AFSK 
> and then sending audio. the vox operates as before but no modulation, 
> no output.
>
> In summary, RX works fine both modes
> TX works fine in DATA A
> TX does not work other than trigering VOX in AFSK A.
>
> Nothing else changes other than the mode on the front panel. Line in, 
> level all set the same.
>
> Figure I must be doing something dumb.
>
> Any help?
>
> Thanks
> Martin, HS0ZED
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net
>