[Elecraft] KPA1500 firmware version 01.87 and K3S/K3 MCU version 05.64 are now in production

[Paul Baldock]

I just loaded 1.87. It appeared I was not able to 
connect via LAN. I use a fixed IP for the 
KPA1500, but discovered the new firmware had 
enabled DHCP. After disabling DHCP with Utility Program a can now connect.

- Paul   KW7Y

At 05:18 PM 11/7/2018, Eric Swartz - WA6HHQ, Elecraft wrote:
>We’ve just released KPA1500 firmware version 
>01.87 to production and is available for 
>download.  We recommend everyone update to this 
>version. Among other enhancements, it includes a 
>new efficient fan temperature control algorithm 
>that emphases more cooling at the lowest fan 
>speeds.  It also has a new KPA1500 menu item 
>that allows enabling/disabling response to power 
>on 'Wake on LAN' commands over the Ethernet, 
>such as from our KPA1500 Remote Software. Fro 
>more info on KPA1500 f/w 01.87 
>see:Â 
>https://elecraft.com/pages/firmware-software 
>and open the "K-Line Firmware and Software" tab. 
>For more info on KPA1500 Remote go to the same 
>link above and open the "Elecraft Contributed 
>Software Packages" tab. K3 MCU version 05.64 is 
>also newly moved to production and is available 
>for download. There’s a new KPA1500 menu item 
>(ATU XCVR KEY) that requires K3S/K3 MCU 05.64, 
>It adds the ability for the amp to request TUNE 
>POWER from the K3S/K3 via the AUX cable when 
>needed for ATU adjustment. To download the new 
>firmware, use the KPA1500 Utility (and K3 
>Utility) firmware tab, “Copy new files from 
>Elecraft”. 73, Eric /elecraft.com/ 
>______________________________________________________________ 
>Elecraft mailing list Home: 
>http://mailman.qth.net/mailman/listinfo/elecraft 
>Help: http://mailman.qth.net/mmfaq.htm Post: 
>mailto:Elecraft at mailman.qth.net This list hosted 
>by: http://www.qsl.net Please help support this 
>email list: http://www.qsl.net/donate.html 
>Message delivered to paul at paulbaldock.com