[Elecraft] KPA1500 firmware version 01.87 and K3S/K3 MCU version 05.64 are now in production

[Bob McGraw K4TAX]

Thanks Eric -   The system integration is really super.  Updates are so 
easy and solid.

Thanks

73

Bob, K4TAX


On 11/7/2018 7:18 PM, Eric Swartz - WA6HHQ, Elecraft wrote:
> We’ve just released KPA1500 firmware version 01.87 to production and 
> is available for download.  We recommend everyone update to this version.
>
> Among other enhancements, it includes a new efficient fan temperature 
> control algorithm that emphases more cooling at the lowest fan 
> speeds.  It also has a new KPA1500 menu item that allows 
> enabling/disabling response to power on 'Wake on LAN' commands over 
> the Ethernet, such as from our KPA1500 Remote Software.
>
> Fro more info on KPA1500 f/w 01.87 see: 
> https://elecraft.com/pages/firmware-software  and open the "K-Line 
> Firmware and Software" tab.
> For more info on KPA1500 Remote go to the same link above and open the 
> "Elecraft Contributed Software Packages" tab.
>
> K3 MCU version 05.64 is also newly moved to production and is 
> available for download.
> There’s a new KPA1500 menu item (ATU XCVR KEY) that requires K3S/K3 
> MCU 05.64, It adds the ability for the amp to request TUNE POWER from 
> the K3S/K3 via the AUX cable when needed for ATU adjustment.
>
> To download the new firmware, use the KPA1500 Utility (and K3 Utility) 
> firmware tab, “Copy new files from Elecraft”.
>
> 73,
>
> Eric
> /elecraft.com/
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net