[Elecraft] K3 - TX EQ settings not remembered.

[Don Wilhelm]

Gary,

Email Tom (author of Win4K3) and see if he has some kind of workaround.

73,
Don W3FPR

On 11/2/2018 3:59 PM, Gary Smith wrote:
> Don,
> 
> I'll give your suggestion a try & see how
> that does.
> 
> I do use Win4K3, I need it to use WSJT as
> WSJT doesn't like to share ports. I used
> to use LP-Bridge which let me
> simultaneously run all my software
> flawlessly, till WSJT... and I fast
> discovered it would not play nice unless
> WSJT had sole communication with my
> K3/K3s.
> 
> With Win4K3 I can use all the software
> simultaneously including WSJT, logging
> program, N1MM & MMTTY without having to
> shut all the other software down every
> time I want to change modes or software.
> 
> If it wasn't for WSJT making this issue,
> it would be simple to just keep doing what
> I was doing with LP-Bridge. As I do use
> MSK144 & some FT8 and want to keep my
> logging program running, I need to keep
> using Win4K3.
> 
> Tom wrote a clever bit of software,
> perhaps there is a way to tell it not to
> change EQ settings, I'll have to check
> that too.
> 
> Thanks & 73,
> 
> Gary
> KA1J
> 
> 
> 
> 
> 
>> Gary,
>>
>> Are you using any software to control the K3?
>> I have just been informed that Win4K3 will often change the EQ
>> settings.
>>
>> Remove the USB or RS-232 connection and try it with only the K3, then
>> set the SSB TX EQ.  Check later to see if it has changed.
>>
>> 73,
>> Don W3FPR
>>
>> On 11/2/2018 3:29 PM, Gary Smith wrote:
>>> Hi Don,
>>>
>>> No, I set them for SSB and at a later time
>>> the TX EQ is flat and I have to change it
>>> back to the settings to fit my mic. I
>>> don't use AM except to listen to broadcast
>>> stations & listen to the nature of RFI.
>>>
>>
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donwilh at embarqmail.com
>