[Elecraft] K3Audio

[Rick WA6NHC]

Legal depends on the country of operation, not all restrict to CW only 
in the band segments.

If the mike audio is switched with PTT (not always 'hot') so no mixing, 
it would work (and is preferred for SSTV mode instead of button of mode 
switching between frames).

So depending on his location and need, maybe but overall it's not a good 
plan to mix the audio.

Rick nhc


On 3/31/2018 9:40 AM, Bob McGraw K4TAX wrote:
> I certainly agree with Joe on this point.   I hear many voice / 
> background noise signals in the "CW" portions of the bands. 
> Furthermore, fact is, it isn't legal to transmit such.
>
>  suppose if one wishes to run Slow Scan TV with audio in the SSB 
> portion of the band it might be justified.  Otherwise, I still say it 
> is a terrible idea.
>
> 73
>
> Bob, K4TAX
>
>
>
>
> On 3/31/2018 11:21 AM, elecraft-request at mailman.qth.net wrote:
>> Message: 20
>> Date: Fri, 30 Mar 2018 17:02:30 -0400
>> From: "Joe Subich, W4TV"<lists at subich.com>
>> To:elecraft at mailman.qth.net
>> Subject: Re: [Elecraft] Re K3 Audio
>> Message-ID:<8fefe1dd-41c4-8e7f-029e-5d41a29a4c50 at subich.com>
>> Content-Type: text/plain; charset=utf-8; format=flowed
>>
>>
>>   > I need both at the same time,  Mike for voice and Line in for 
>> digital.
>>
>> This is absolutely a terrible idea. I doubt that your shack is silent
>> while working data modes and any noise - you talking, someone else
>> yelling at your, a TV/radio/computer running in the background, or even
>> fan noise will be picked up by the open mic.
>>
>> That said ...
>>
>>> Does any one know the command for both Mike in Front Panel and Line
>>> in rear panel?
>> Assuming you will be using USB*with CMP set to zero*, set MENU:MIC SEL
>> as needed for your mic and MENU:MIC+LIN = ON.
>>
>> Note: you will first need to set MENU:MIC SEL=LINE and adjust the mic
>> gain/sound card output for four to five bars of ALC.  This sets the Line
>> IN gain.  Then switch to MENU:MIC SEL as needed for your mic (FP.h or
>> FP.L) and again adjust the mic gain for ALC peaking between 5 to 7 bars.
>> Now you can select MENU:MIC+LINE and set it to ON to enable both inputs.
>> Adjusting the mic gain with MENU:MIC+LINE = ON will adjust*ONLY*  the
>> mic gain for the*MICROPHONE*  input, in order to change the Line In
>> (digital) level, you will need to adjust the sound card output*or*
>> change MENU:MIC SEL to LINE before adjusting the mic gain.
>>
>> 73,
>>
>>      ... Joe, W4TV
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wa6nhc at gmail.com