[Elecraft] KPA500 Band Following

[Richard]

HALLELUJAH!

Thank you! If it had been a congressman, it would have bitten me.

Cheers!
Richard - W4KBX

> On Mar 11, 2018, at 11:00 AM, Michael Eberle <mteberle at mchsi.com> wrote:
> 
> The first thing I would do is check to see that the 'RADIO' option in the KPA500 menu is set to 'K3.'
> 
> Mike - KI0HA
> 
> 
> On 3/11/2018 09:54, Richard wrote:
>> K3S - KPA500 - KAT500
>> 
>> A friend of mine who upgrades and repairs Elecraft stuff made me the two “15-pin” cables for band following. They work perfectly on his own K3S - KPA500 - KAT500 setup, both the tuner and the amp follow K3S band changes.
>> 
>> However, with the same cables on my setup, the tuner follows the radio, but the amp does not.
>> 
>> As an experiment, I plugged the cable from the K3S directly into the amp: still no band following.
>> 
>> Before I do any heavy lifting, can anyone suggest other causes and cures?
>> 
>> Cheers,
>> 
>> Richard Kunc — W4KBX
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to mteberle at mchsi.com
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to flathat at comcast.net