[Elecraft] KPA500 Band Following

[Michael Eberle]

The first thing I would do is check to see that the 'RADIO' option in 
the KPA500 menu is set to 'K3.'

Mike - KI0HA


On 3/11/2018 09:54, Richard wrote:
> K3S - KPA500 - KAT500
>
> A friend of mine who upgrades and repairs Elecraft stuff made me the two “15-pin” cables for band following. They work perfectly on his own K3S - KPA500 - KAT500 setup, both the tuner and the amp follow K3S band changes.
>
> However, with the same cables on my setup, the tuner follows the radio, but the amp does not.
>
> As an experiment, I plugged the cable from the K3S directly into the amp: still no band following.
>
> Before I do any heavy lifting, can anyone suggest other causes and cures?
>
> Cheers,
>
> Richard Kunc — W4KBX
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to mteberle at mchsi.com