[Elecraft] [K3] A momentary BAT LOW warning

[Don Wilhelm]

Thanks for that information.  This is just one example of those things 
that are first blamed on some fault in the rig turns out to be a fault 
with something connected to the rig.

That is not limited to Elecraft gear - it can happen with any rig.

73,
Don W3FPR

On 3/4/2018 11:03 AM, Barry wrote:
> In transmit, the voltage was dropping from 13.3 to about 11 at the radio.
> The ground wire side of the power cable had worked loose within its terminal
> lug at the power supply, causing excess drop.  Reattached and now the drop
> is just a few tenths of a volt.  Problem solved.