[Elecraft] K3 and WSJT-X Split operation.

[Rick WA6NHC]

I run WSJT-X via HRD rig control (SignaLink audio) for CAT PTT (and VFO) 
on the K3.

I do NOT set WSJT-X for any split.  The (sole) VFO doesn't move once set.

In everyday FT8, it's fine to let the audio determine actual frequency 
(the other uses one 'tone', I stay on mine or not, think of it as cross 
band ops).

In hound mode, the change in 'tone' is determined by the program (once 
ack'ed by the fox); no VFO shift is required.

It's been flawless without moving a VFO (except when initially selecting 
a band or changing to the fox frequency).  No added commands to the K3, 
life is simple.

There is a designed lag from keyup to actual generation of tone, which 
is fine, it lets all the hardware (amps, pre-amps) have time to get 
'safe' if needed (the KPA line doesn't require it).

Yes, WSJT-X whines every startup in hound configuration that it 'needs' 
split, but that isn't the case in reality.  This setup works, it's 
simple and simple ROCKS on any day.

Rick nhc


On 6/29/2018 10:44 AM, Wes Stewart wrote:
> Do you have the same mode selected for both VFOs?  Give the A -> B a 
> double tap to be sure. Understand that in Hound mode you need to set 
> your TX frequency above 1000 Hz.  If the Fox calls you he will move 
> your TX down to his frequency.
>
> I'm still experiencing a TX delay, which I think is WSJT commanding 
> the K3 to go Split and then waiting for confirmation. This has been 
> discussed before.  Also, I use VOX and we still don't have VOX 
> settings remembered by mode, so there is constant fiddling to get the 
> VOX to activate.
>
> Wes  N7WS
>
>
> On 6/29/2018 9:46 AM, K1RI wrote:
>> I too run split FT8 Data A.  I cannot get the K3 to transmit in the WSJT
>> DXPedition Hound. What am I missing?  My IC-7610 works great and I 
>> would run
>> a comparison.
>>
>>
>> Tnx,  Bob K1RI
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wa6nhc at gmail.com