[Elecraft] Tx Mon

[Don Wilhelm]

Bob,

It does not matter - RF will flow through one and then the other.
Depending on how much coax you have between them, you will see some 
difference in SWR unless the feedline is perfectly flat.

73,
Don W3FPR

On 6/21/2018 2:43 AM, Bob DeHaney wrote:
> I have a P3 with the TX Mon option.  I have an LP100A sensor in my feedline.
> Should the Tx Mon sensor be installed before or after the LP100A sensor, or
> it doesn't matter?