[Elecraft] Default K3 transmit delay may be too short for slow QRO amplifiers

[rich hurd WC3T]

"More seriously, I could see a foot switch as a VOX inhibit. Broadcasters
have a “cough button” to mute an otherwise live mic."

Can't you do that with the KX3 in VOX mode but with ACC2 IO set to
"LO=Inh?"  That's what I thought.  I'm far away from my KX3 so I can't test
it.

On Fri, Jun 8, 2018 at 18:24 Walter Underwood <wunder at wunderwood.org> wrote:

> Maybe you could put a tone generator on the foot switch to bleep yourself.
> Leave VOX on, but stomp on the pedal when you encounter a lid. :-)
>
> More seriously, I could see a foot switch as a VOX inhibit. Broadcasters
> have a “cough button” to mute an otherwise live mic.
>
> wunder
> K6WRU
> Walter Underwood
> CM87wj
> http://observer.wunderwood.org/ (my blog)
>
> > On Jun 8, 2018, at 12:05 PM, Josh Fiden <josh at voodoolab.com> wrote:
> >
> > My poor impulse control makes it impossible to operate within FCC regs
> using vox during the inevitable lid encounters.
> >
> > 73
> > Josh W6XU
> >
> > Sent from my mobile device
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rich at wc3t.us

-- 
72,
Rich Hurd / WC3T / DMR: 3142737
PA Army MARS, Northampton County RACES, EPA-ARRL Public Information Officer
for Scouting
Latitude: 40.761621 Longitude: -75.288988  (40°45.68' N 75°17.33' W) Grid:
*FN20is*