[Elecraft] K3 AF knob..

[Don Wilhelm]

Linas and all,

I don't know if the policy is still in place, but several years ago, 
Eric stated that defective knobs would be replaced at no cost.  Contact 
Elecraft support.

73,
Don W3FPR

On 6/8/2018 8:25 AM, Linas Balsys wrote:
> The same is here. It is the crack in the knob, I can see it. You can try to
> tighten up the screw a bit but not too much not to finaly break the knob.
> If it is not completely loose you still can find the end stop while turning
> very gently and slowly. The best way surely is to get the knob replaced :)
> 73 Linas LY2H
> 
> 
> <<It's taken me 8 years to finally "break" something.  Well it's not....>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donwilh at embarqmail.com
>