[Elecraft] KX3/fldigi/USB sound card

[Don Wilhelm]

Brian,

VFO Scanning should happen only if Scanning is turned on in the menu. 
That has nothing to do with the mode selection - scanning can take place 
in any mode.

The main reason for using DATA A is that compression is set to zero, the 
equalization is set flat, and in the K3/K3S you can set MIC SEL to LINE 
without interfering with whatever you have set for SSB settings.

73,
Don W3FPR

On 7/8/2018 5:39 PM, Brian Waterworth wrote:
> Kenny, do have the kx3 set for Data A?  I have notes from a few years ago
> that indicates Data A must be selected or you will get the VFO scanning.
> Of course this is in addition to what Don and Walter have advised:  mic btn
> should be off.