[Elecraft] KX3/fldigi/USB sound card

[Brian Waterworth]

Kenny, do have the kx3 set for Data A?  I have notes from a few years ago
that indicates Data A must be selected or you will get the VFO scanning.
Of course this is in addition to what Don and Walter have advised:  mic btn
should be off.

Regards
Brian
VE3IBW

On Sun, Jul 8, 2018 at 5:26 PM Walter Underwood <wunder at wunderwood.org>
wrote:

> The mic plug is shorting the extra contacts on the mic jack. These are
> used for PTT and for Up/Down.
>
> You can disable that in the menus with MIC BTN OFF.
>
> Or, you can use a stereo to mono splitter cable. The mic plug would go
> into the right channel. The left can be used for PTT.
>
> wunder
> K6WRU
> Walter Underwood
> CM87wj
> http://observer.wunderwood.org/ (my blog)
>
> > On Jul 8, 2018, at 1:24 PM, Kenneth TAnner <kgtanner77 at gmail.com> wrote:
> >
> > Trying to set up fldigi with USB sound card.  Using the patch cables from
> > elecraft, when I plug the green cable into the radio mic port and the
> sound
> > card headphone port it causes the radio to increase vfo frequency.  Is
> > there something I need to change on radio or in fldigi?  Tia
> > Kenny(kf5dnc)
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to wunder at wunderwood.org
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to brian.waterworth at gmail.com
>