[Elecraft] KX3 - RCL REQ when trying to channel hop (scan)?

[Cady, Fred]

That's the behavior you get when VFO IND is yes.  It will do that on any memory recall -- only retrieve VFO A and not VFO B.

Cheers and HNY,

Fred KE7X


________________________________
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> on behalf of Fred Jensen <k6dgw at foothill.net>
Sent: Thursday, January 4, 2018 2:33 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] KX3 - RCL REQ when trying to channel hop (scan)?

To the list, others may have set up this way:

In my memory channels, the 5 60 meter channels are set up for channel
hopping, with VFO A being the center of the channel and CW, and VFO B
being the lower edge of the channel [carrier position], and USB.
Selecting a channel then lets me switch between CW and USB with the A/B
switch.

Changing the VFO A steps through the 5 channels.  However, it does not
seem to take VFO B with it.  VFO B remains on the first channel selected.

I set the memories up with the K3 Freq Memory editor.  Am I doing
something wrong, or is this how it works.  If the latter ... any chance
it could be set to take VFO B along with a rotation of VFO A?

73,

Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County

On 1/4/2018 1:09 PM, Don Wilhelm wrote:
> For Channel Hopping or Live Scan, you store the channels in memory
> with an "*" label as you have done.  Then you do a memory recall for
> one of those channels.  The KX3 will go to that channel.  Use the VFO
> knob to hop from one channel to the next.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to fcady at montana.edu