[Elecraft] KX3 - RCL REQ when trying to channel hop (scan)?

[Fred Jensen]

To the list, others may have set up this way:

In my memory channels, the 5 60 meter channels are set up for channel 
hopping, with VFO A being the center of the channel and CW, and VFO B 
being the lower edge of the channel [carrier position], and USB.  
Selecting a channel then lets me switch between CW and USB with the A/B 
switch.

Changing the VFO A steps through the 5 channels.  However, it does not 
seem to take VFO B with it.  VFO B remains on the first channel selected.

I set the memories up with the K3 Freq Memory editor.  Am I doing 
something wrong, or is this how it works.  If the latter ... any chance 
it could be set to take VFO B along with a rotation of VFO A?

73,

Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County

On 1/4/2018 1:09 PM, Don Wilhelm wrote:
> For Channel Hopping or Live Scan, you store the channels in memory 
> with an "*" label as you have done.  Then you do a memory recall for 
> one of those channels.  The KX3 will go to that channel.  Use the VFO 
> knob to hop from one channel to the next.