[Elecraft] FIRST TIME HOOKUP OF N1MM+ TO K3 VIS MICROHAM USB INTERFACE III

[Jack Brindle]

A little more info. The K3 and K3S default to 38400 bps on the serial port. This can be changed in the configuration menu, and you should verify the setting in the menu system.
If it is still set to the default, set your PC for 38400 bps (and the MicroHam device as well, then give it a try. N1MM works very well with the K3, so it is a matter of getting the configuration correct to make it work.

We 73!

Jack, W6FB


> On Feb 15, 2018, at 5:33 PM, Greg Best <gbconsulting54 at gmail.com> wrote:
> 
> I am trying to get N1MM+ to talk to my K3 but will not do it.
> 
> I am setup for 4800 B, Data 8 bits, Parity N, stop bits 1.  DTR and DTS have
> been tried with both Always ON and Always OFF but neither one works.
> 
> I have tried the Radio reset command from N1MM+ with no luck.
> 
> Can anyone help?
> 73¹s
> Greg
> 
> 16100 Outlook Avenue
> Stilwell, KS 66085
> 816-792-2913 
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jackbrindle at me.com