[Elecraft] K-POD labels

[hawley, charles j jr]

I use a 3 by 5 card which just fits under the Pod. 
I draw a grid of 4 squares with ink on each side that sticks out from under the Pod and pencil in the commands.
Chuck
KE9UW

Sent from my iPhone, cjack 

> On Aug 28, 2018, at 4:34 PM, VE3WDM <ve3wdm at hotmail.com> wrote:
> 
> I have used the P-touch labels but stick them on a pre-cut  magnetic strip
> this way you can have add or remove them from the K-pod. The labels are held
> in place by the magnet. This way you can have a set for contesting, QSO and
> DXpeditions. 
> 
> https://ve3wdm.blogspot.com/2017/04/some-dx-contacts-today.htm
> 
> Above is a link to my blog that shows a shot of the K-pod with the magnetic
> labels. 
> 73
> Mike 
> VE3WDM
> 
> 
> 
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to c-hawley at illinois.edu