[Elecraft] K3S settings for Heil HM-10 XD microphone

[Nr4c]

I’d start by using same strings as with previous mic. Adjust as necessary. 



Sent from my iPhone
...nr4c. bill


> On Aug 14, 2018, at 3:03 PM, Bob McGraw K4TAX <rmcgraw at blomand.net> wrote:
> 
> Does  Heil have the settings on their website? I seem to recall they do.  That is a good place to start. 
> 
> Bob, K4TAX
> 
> 
> Sent from my iPhone
> 
>> On Aug 14, 2018, at 1:58 PM, Thomas Donohue <tomdon92 at gmail.com> wrote:
>> 
>> I recently purchased subject mic and will be connecting it to the K3S shortly. Before I do that, I was wondering what mic settings to use? I currently have a Heil PR-10 mic and am using the MIC FP HI menu setting and a mic gain of 20; the PR-10 works fine, but I wanted to get a mic that I could switch back and forth from the wide HC-5X cartridge to the narrow or DX HC-4X cartridge, thus the HM-10 XD. I have purchased the XLR 4 pin CC-1, connecting cable to replace the XLR 3 pin cable that I use with the PR-10 for connection to the FP Mic connector. The PR-10 has a 600 ohm balance impedance while the HM-10 XD has a 600 ohm impedance, unbalanced, I guess. To begin I intend to use the MIC FP HI menu setting. Does anyone see a problem with that or is there anyone using a HM-10 XD that can offer some suggested settings. Any response or info will be appreciated.
>> 
>> Best 73,
>> Tom/W1QU 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to rmcgraw at blomand.net
>> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com