[Elecraft] KPA-1500 Power Supply Cable Size

[David Bunte]

I am also a bit confused (not the first time), but I could have SWORN that
the initial query was from someone who wanted a SHORTER cable.

Dave - K9FN

On Wed, Aug 1, 2018 at 3:45 PM john at kk9a.com <john at kk9a.com> wrote:

> Elecraft was my first experience with power pole connectors and I have
> purchased custom cables from Powerwerx. They did a nice job, eventually I
> purchased a crimper and connectors and made cables myself. If you are
> making the KPA1500 cable longer than the factory cable it is probably
> desirable to use a larger diameter. The factor may not be able to
> accommodate this since the 75 amp connector is made for 6 awg max.
>
> John KK9A
>
>
> Richard Thorne rthorne at rthorne.net
> Wed Aug 1 14:15:28 EDT 2018
>
> Mike,
>
> I went directly to Elecraft with my question. The answer is 6g.
>
> I was told to be sure to use the correct crimp tool for the job.  If I
> make the cable I'll probably just have Powerwerx handle it as they have
> the correct hydraulic tool for the job.
>
> Rich - N5ZC
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dpbunte at gmail.com
>