[Elecraft] K3 audio line in/out cables

[Nr4c]

No need for LINE cables if you have the updated USB KIO3 system. 

Sent from my iPhone
...nr4c. bill


> On Apr 3, 2018, at 3:09 PM, Don Wilhelm <donwilh at embarqmail.com> wrote:
> 
> Tony,
> 
> You might want to use LINE IN for computer generated voice or something like that.
> Be aware that if you plug anything into the LINE IN jack, the K3 will turn off the audio output (but not input) of the USB AUDIO CODEC.
> 
> 73,
> Don W3FPR
> 
>> On 4/3/2018 12:20 PM, N2TK, Tony wrote:
>> I have upgraded both of my K3's to make them as close to a K3S as best I
>> can. Presently cleaning up the rats nest of cables. I am using USB.
>> I no longer use the Line IN and OUT jacks.  Presently only using FSK. I plan
>> on adding FT8 shortly. With the on board CODECs is there any reason I still
>> need the LINE cables? Want to check to makes sure I am not missing
>> something.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com