[Elecraft] K3 audio line in/out cables

[N2TK, Tony]

Tnx Don for the info.
N2tK, Tony

-----Original Message-----
From: Don Wilhelm [mailto:donwilh at embarqmail.com] 
Sent: Tuesday, April 03, 2018 3:10 PM
To: N2TK, Tony <tony.kaz at verizon.net>; Elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 audio line in/out cables

Tony,

You might want to use LINE IN for computer generated voice or something like that.
Be aware that if you plug anything into the LINE IN jack, the K3 will turn off the audio output (but not input) of the USB AUDIO CODEC.

73,
Don W3FPR

On 4/3/2018 12:20 PM, N2TK, Tony wrote:
> I have upgraded both of my K3's to make them as close to a K3S as best 
> I can. Presently cleaning up the rats nest of cables. I am using USB.
> 
> I no longer use the Line IN and OUT jacks.  Presently only using FSK. 
> I plan on adding FT8 shortly. With the on board CODECs is there any 
> reason I still need the LINE cables? Want to check to makes sure I am 
> not missing something.