[Elecraft] 60 meters and the K3S

[Nr4c]

Split on 60 meters takes two channels and is a waste of BW. 

Remember there is no "up 1k" on 60 meters. TX is only authorized on the channels. 

Sent from my iPhone
...nr4c. bill


> On Sep 29, 2017, at 7:50 PM, Fred Jensen <k6dgw at foothill.net> wrote:
> 
> I used the K3 Memory Editor and set up the 5 "channels" for both CW and SSB.  Worked really slick and I could give them meaningful names that appear in VFO B.  It's on the Elecraft site, "K3/K3s, KX3, and K2 Control Software."  The memories contain both VFO A and B data, so you can set up one for SSB and one for CW or maybe PSK31.  You can even do split, CTCSS tones, etc.  There are a half-million [or so] memories so you're not likely to run out.
> 
> Note: Part 97 uses the term "RTTY" for an authorized emission on 60 meters, but the emission designator sure looks like PSK31, not 170 Hz FSK.
> 
> 73,
> 
> Fred ["Skip"] K6DGW
> Sparks NV DM09dn
> Washoe County
> 
>> On 9/29/2017 1:20 PM, w1rm at comcast.net wrote:
>> Some time back there was some great information on setting up the K3(s) to
>> operate on 60 meters.  It involved saving the frequencies in memories and
>> recalling them.  I had my K3 set up that way but with the K3S changeover,
>> that's gone and I can't seem to find that information on the web (perhaps
>> I'm not searching on the right terms).
>> 
>>  
>> Does anyone remember that and can point me in the right direction?
>> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com