[Elecraft] KXPD3 problems

[Don Wilhelm]

Ignacy,

I have no idea why you would want to operate it when not fully inserted 
and the securing screws tightened.
It does not sound to me as though you have a problem.

73,
Don W3FPR

On 9/9/2017 3:02 PM, Ignacy wrote:
> KXPD3 worked well until last week (ES/NO9E). Now as Z3/NO9E, KXPD3 sends when
> fully inserted. When partially inserted, it works OK.  It seems that the
> bottom pins in KX3 are a bit lower and the top ones are a bit recessed. But
> perhaps it was always that way.