[Elecraft] OT - WSJT-X & K3s

[Geoff Allsup]

I'd also set SPLIT to NONE and then restart everything. And be sure the radio is turned on before starting WSJT



Sent from my iPhone

Geoff Allsup, W1OH       gallsup at whoi.edu or w1oh at whoi.edu
Senior Engineer                         Upper Ocean Processes Group
Woods Hole Oceanographic Institution            Woods Hole, MA


> On Sep 3, 2017, at 21:37, Randy Farmer <w8fn at tx.rr.com> wrote:
> 
> Try turning off Hardware Handshake.
> 
> 73...
> Randy, W8FN
> 
>> On 9/3/2017 8:19 PM, Gary Smith wrote:
>> I am likely missing something. I can not
>> seemingly get any communication between
>> the software and the radio.
>> 
>> Here is a screenshot of my latest attempt
>> and the error message.
>> 
>> http://doctorgary.net/WSJT-1.8-radio.jpg
>> 
>> I have tried (I think) all the
>> permutations in this screen and CAT is a
>> failure.
>> 
>> In the Audio tab I have Input as:
>> Microphone (2-USB Audio CODEC)
>> Output as
>> Speakers (2-USB Audio CODEC)
>> 
>> General & main
>> http://doctorgary.net/WSJT-1.8-General.jpg
>> 
>> It has to be simple and obvious but so far
>> it's clear as mud. I'm trying to swim
>> upstream.  ;)
>> 
>> 73,
>> 
>> Gary
>> KA1J
>> 
>> 
>>> I do not understand the need for extra stuff. I have run wsjt-x with
>>> my K3S and single USB cable using DTR and RTS for CW and  PTT and
>>> using the built in sound.
>>> 
>>> Be sure and sync clock with internet before trying to do anything with
>>> JT modes.
>>> 
>>> Sent from my iPhone
>>> ...nr4c. bill
>>> 
>>> 
>>>> On Sep 3, 2017, at 5:47 PM, Gary Smith <Gary at ka1j.com> wrote:
>>>> 
>>>> I'm sure this has been asked before but I
>>>> am not finding the solution, the story of
>>>> my life...
>>>> 
>>>> I just loaded WSJT-X into the Windows 10
>>>> computer & I have a K3s. I have been
>>>> following the user's guide found here:
>>>> https://www.physics.princeton.edu/pulsar/K
>>>> 1JT/wsjtx-doc/wsjtx-main-1.7.0.html
>>>> 
>>>> I am using LP Bridge to give me a unique
>>>> serial port ( 11 ).
>>>> 
>>>> In setting up the radio I have followed (I
>>>> think I have followed) the instructions
>>>> but when I click Test CAT I get a failure.
>>>> I tried selecting the different clickable
>>>> options but have no success, it always
>>>> comes up as a failure. I successfully run
>>>> MMTTY and N1MM with no issues. I am having
>>>> difficulty getting the audio to run from
>>>> the computer but that doesn't seem to
>>>> bother N1MM & MMTTY operation.
>>>> 
>>>> After much googling I have resorted to
>>>> asking here for suggestions.
>>>> 
>>>> If there is a user's group that has people
>>>> familiar with WSJT and the K3/K3s that I
>>>> can get info from, that would be better
>>>> than using the bandwidth here.
>>>> 
>>>> Thanks & 73,
>>>> 
>>>> Gary
>>>> KA1J
>>>> 
>>>> ______________________________________________________________
>>>> Elecraft mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Elecraft at mailman.qth.net
>>>> 
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>> Message delivered to nr4c at widomaker.com
>>> 
>> 
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to w8fn at tx.rr.com
>> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to gallsup at whoi.edu
>