[Elecraft] OT - WSJT-X & K3s

[Randy Farmer]

Try turning off Hardware Handshake.

73...
Randy, W8FN

On 9/3/2017 8:19 PM, Gary Smith wrote:
> I am likely missing something. I can not
> seemingly get any communication between
> the software and the radio.
>
> Here is a screenshot of my latest attempt
> and the error message.
>
> http://doctorgary.net/WSJT-1.8-radio.jpg
>
> I have tried (I think) all the
> permutations in this screen and CAT is a
> failure.
>
> In the Audio tab I have Input as:
> Microphone (2-USB Audio CODEC)
> Output as
> Speakers (2-USB Audio CODEC)
>
> General & main
> http://doctorgary.net/WSJT-1.8-General.jpg
>
> It has to be simple and obvious but so far
> it's clear as mud. I'm trying to swim
> upstream.  ;)
>
> 73,
>
> Gary
> KA1J
>
>
>> I do not understand the need for extra stuff. I have run wsjt-x with
>> my K3S and single USB cable using DTR and RTS for CW and  PTT and
>> using the built in sound.
>>
>> Be sure and sync clock with internet before trying to do anything with
>> JT modes.
>>
>> Sent from my iPhone
>> ...nr4c. bill
>>
>>
>>> On Sep 3, 2017, at 5:47 PM, Gary Smith <Gary at ka1j.com> wrote:
>>>
>>> I'm sure this has been asked before but I
>>> am not finding the solution, the story of
>>> my life...
>>>
>>> I just loaded WSJT-X into the Windows 10
>>> computer & I have a K3s. I have been
>>> following the user's guide found here:
>>> https://www.physics.princeton.edu/pulsar/K
>>> 1JT/wsjtx-doc/wsjtx-main-1.7.0.html
>>>
>>> I am using LP Bridge to give me a unique
>>> serial port ( 11 ).
>>>
>>> In setting up the radio I have followed (I
>>> think I have followed) the instructions
>>> but when I click Test CAT I get a failure.
>>> I tried selecting the different clickable
>>> options but have no success, it always
>>> comes up as a failure. I successfully run
>>> MMTTY and N1MM with no issues. I am having
>>> difficulty getting the audio to run from
>>> the computer but that doesn't seem to
>>> bother N1MM & MMTTY operation.
>>>
>>> After much googling I have resorted to
>>> asking here for suggestions.
>>>
>>> If there is a user's group that has people
>>> familiar with WSJT and the K3/K3s that I
>>> can get info from, that would be better
>>> than using the bandwidth here.
>>>
>>> Thanks & 73,
>>>
>>> Gary
>>> KA1J
>>>
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to nr4c at widomaker.com
>>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w8fn at tx.rr.com
>