[Elecraft] [K3] Question re KAT500 Utility for the Mac

[Don Wilhelm]

Don,

I think there may have been a software utility in the past which allowed 
you to do something like you were trying, but I may be thinking of the 
KRC2 utility instead.

I am glad to hear that you are working OK now.

73,
Don W3FPR

On 10/19/2017 8:38 PM, Don Putnick wrote:
> Thanks, Don. No, you didn't misunderstand my question. I was trying to 
> select the antenna first, then select one or more bands second, which 
> doesn't work. Your way was to do it the other way around; select the 
> band first, then select one or more antennas second, which does work. 
> All better.
> Thanks again and 73!
> Don NA6Z
>
> On Tue, Oct 17, 2017 at 4:08 PM, Don Wilhelm <donwilh at embarqmail.com 
> <mailto:donwilh at embarqmail.com>> wrote:
>
>     Don,
>
>     There is no selection of a "group of bands" - but you can select
>     the proper antenna for any one band.  Once you have done that,
>     change bands and select the desired antenna for that band.  When
>     you have covered all bands of interest and selected the antennas
>     for each, is the proper antenna selected when you switch to that
>     band?  If so, all should be well.
>
>     Did I misunderstand something in your question?
>