[Elecraft] [K3] Question re KAT500 Utility for the Mac

[Don Putnick]

Thanks, Don. No, you didn't misunderstand my question. I was trying to
select the antenna first, then select one or more bands second, which
doesn't work. Your way was to do it the other way around; select the band
first, then select one or more antennas second, which does work. All better.
Thanks again and 73!
Don NA6Z

On Tue, Oct 17, 2017 at 4:08 PM, Don Wilhelm <donwilh at embarqmail.com> wrote:

> Don,
>
> There is no selection of a "group of bands" - but you can select the
> proper antenna for any one band.  Once you have done that, change bands and
> select the desired antenna for that band.  When you have covered all bands
> of interest and selected the antennas for each, is the proper antenna
> selected when you switch to that band?  If so, all should be well.
>
> Did I misunderstand something in your question?
>
> 73,
> Don W3FPR
>
>
> On 10/17/2017 6:54 PM, Don Putnick wrote:
>
>> I can't seem to select one group of bands for one antenna and a different
>> group of bands for another. All that seems to work for me is either one
>> band or all bands. Suggestions please.
>>
>