[Elecraft] KX3 CW Decode question
rich hurd WC3T
rich at wc3t.us
Sun Nov 26 19:26:51 EST 2017
Hi Tom (or anyone else who knows),
Does this also hold true for the decode function in the KX3 and the PX3?
Should I not run those simultaneously either? Or is it only the
interaction between the hardware and the utility program?
On Sat, Nov 25, 2017 at 15:17 tomb18 <tomb18 at videotron.ca> wrote:
> HiActually what is happening is that both the p3 svga and the utility are
> attempting to get access to the decoded text at the same time so when one
> gets a character, the other misses it.. If you wish to use the utility,
> just turn off text decoding display on the svga. 73 Tom
>
>
> Sent from my Samsung Galaxy smartphone.
> -------- Original message --------From: MaverickNH <cbjesseeNH at comcast.net>
> Date: 2017-11-25 2:31 PM (GMT-05:00) To: elecraft at mailman.qth.net
> Subject: [Elecraft] K3S/P3-SVGA CW Decode - P3 Power Cycle
> I have always had problems using the K3 Utility to change configurations
> from
> another mode to CW, as I could see text decode on the K3S VFO B display
> area
> after a restore to my CW configuration but not on the P3-SVGA external
> display without a lot of fiddling. I see now that simply turning the P3
> on/off is required after a configuration restore to get that text decode to
> display.
>
> I would make a note of that but would just forget where I put it. Now, it's
> right here for me to find!
>
> Bret/N4SRN
>
>
>
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to tomb18 at videotron.ca
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rich at wc3t.us
--
---
72,
Rich Hurd / WC3T / DMR: 3142737
PA Army MARS, Northampton County RACES, EPA-ARRL Public Information Officer
for Scouting
Latitude: 40.761621 Longitude: -75.288988 (40°45.68' N 75°17.33' W) Grid:
*FN20is*
More information about the Elecraft
mailing list