[Elecraft] sharing K3 RS232 to CAT and Remoterig

Jorge Diez - CX6VM cx6vm.jorge at gmail.com
Tue Nov 14 16:26:05 EST 2017


Hello Fred

I lost automatically antenna change because I needed to remove my CAT cable
from K3 to connect remoterig. Of course if I removed remoterig RS232 cable
and connect CAT cable all is OK as I had it before connecting remoterig

That switch A/B is not an option for what I am looking for,  I need both at
the same time

thanks!
Jorge

2017-11-14 18:12 GMT-03:00 Fred Jensen <k6dgw at foothill.net>:

> Jorge,
>
> Basically, you cannot share an serial RS-232 connection between devices,
> with one exception: It is possible to have a receive-only device monitor
> [eavesdrop or "listen in" on] the TXD or RXD signals.  It can't transmit
> though.
>
> "So now I lost the feature to change antennas automatically when I change
> bands on the K3"
>
> Do you mean that you changed your connection back from the remoterig to
> your local equipment and that no longer works?
>
> I use an A/B data switch to switch my K3 CAT port between the local
> computer when I'm operating with my home antenna, and the remoterig for
> when I'm operating W7RN remotely.
>
> 73,
>
> Fred ["Skip"] K6DGW
> Sparks NV DM09dn
> Washoe County
>
>
> On 11/14/2017 12:23 PM, Jorge Diez - CX6VM wrote:
>
>> Hello
>>
>> At my station, I have Elecraft K3, Bandmaster III, SixPack, CAT cable
>> connected to K3´s RS232
>>
>> So when I change bands in the radio, antenna is selected automatically
>> through CAT cable and band decoder (Bandmaster III)
>>
>> Today I connected remoterig box, so needed to remove CAT cable to connect
>> remoterig.
>>
>> So now I lost the feature to change antennas automatically when I change
>> bands on the K3
>>
>> How can I do to share RS232 to have CAT and remoterig at the same time?
>>
>> thanks,
>> Jorge
>> CX6VM/CW5W
>> ______________________________________________________________
>>
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to cx6vm.jorge at gmail.com




-- 
73,
Jorge
CX6VM/CW5W


More information about the Elecraft mailing list