[Elecraft] K1 - 2 band, is possible to add another 2 band PCB ?

[Don Wilhelm]

Roney,

When you change band boards, you will have to enter the menu and change 
the "b1" and "b2" parameters to match whichever bands you have on the board.
b3 and b4 are only for the 4 band board which is no longer available.
The 2 band board only allows "b1" and "b2".

The K1 does remember the CAL OPF offsets for up to 6 bands, so if you 
set that up initially, you will have correct calibration and frequency 
display.

73,
Don W3FPR

On 5/24/2017 10:08 AM, roney wrote:
> Hello, now that my Rig is ready, I want to ask something that wasn't clear
> when I bought it.
> 
> In Elecraft website, there is a "*KFL1-2
> <http://www.elecraft.com/k1_page.htm#K1%20Options> Additional 2 Band Module*";
> I did not buy it, because I still don't know if it works.
>