[Elecraft] K1 - 2 band, is possible to add another 2 band PCB ?

[Detrick Merz]

All 4 bands cannot be installed at the same time. If you buy the second 2
band module for 20/40 you will have to remove the 80/15 module to install
the 20/40. You will also need to reprogram B1 to 14 and B2 to 7. Every time
you remove one band module and install another you should go through the
menu to change B1 and B2 to match the installed module.

73,

-detrick
KI4STU

On Wed, May 24, 2017 at 10:08 AM, roney <roneymonte at gmail.com> wrote:

> Hello, now that my Rig is ready, I want to ask something that wasn't clear
> when I bought it.
>
> In Elecraft website, there is a "*KFL1-2
> <http://www.elecraft.com/k1_page.htm#K1%20Options> Additional 2 Band
> Module*";
> I did not buy it, because I still don't know if it works.
>
> I already have B1 as 3.500 mhz
> I already have B2 as 21.000 mhz
>
> If I buy and add the second 2 band module, can I have all together 4 bands
> in my Rig ?
> (Like adding B3 as 14.000 mhz, and B4 as 7.000 mhz)
>
> Thanks
> Roney PY1ZB
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to detrick at merzhaus.org
>