[Elecraft] KPA 500 Fan Continues to Run

[Don Wilhelm]

Apologies, I am not reading well this morning - if the fan continues to 
run with the amp turned OFF, then there is something wrong - like the 
power supply not turning off.
The fan normally runs briefly when the amp is turned off as a means of 
discharging the filter capacitors.

Contact support

73,
Don W3FPR

--------------------------------------------------------------
Bill,

Check the menu setting for FAN CTL - any setting other than NOR will 
cause the fan to run continuously.
If it runs all the time when set to NOR, contact support.

73,
Don W3FPR

On 5/8/2017 8:30 AM, Bill Gaines wrote:
> With the amp and rig turned off the fan in the KPA500 continues to run. Not just the short interval I was used to it running, but for days it will run.