[Elecraft] K2 and kpa 100 (2)

[Christophe F8ACF-56]

hello don , hello to all ,
I will put everything in the box

I will not have time to work on the KPA100 before mid September

Too much work at the professional level

Thanks again for the help of forum 73 , Christophe F8ACF-56

      De : Don Wilhelm <donwilh at embarqmail.com>
 À : Christophe F8ACF-56 <f8acf56 at yahoo.fr>; Elecraft Reflector <elecraft at mailman.qth.net> 
 Envoyé le : Jeudi 29 juin 2017 22h05
 Objet : Re: [Elecraft] K2 and kpa 100 (2)
   
Christophe,

Yes, that is OK.  Voltages within 10% of the value printed in the manual 
are normally OK.

73,
Don W3FPR

On 6/29/2017 3:02 PM, Christophe F8ACF-56 via Elecraft wrote:
> Hello Don, and all ,
> So I arrived on page 26 left column down
> 
> When the K2 starts up the K2 says: 12.7 Volt I 0.32 amp
> I think it's okay?
> 
> All values appear OK
> 
> un single doubt
> 
> For U1 pin 27 I have 5.7
> For U1 pin 28 I have 5.58
> 
> But I think it's OK, okay?
>