[Elecraft] K2 and kpa 100 (2)

[Don Wilhelm]

Christophe,

Yes, that is OK.  Voltages within 10% of the value printed in the manual 
are normally OK.

73,
Don W3FPR

On 6/29/2017 3:02 PM, Christophe F8ACF-56 via Elecraft wrote:
> Hello Don, and all ,
> So I arrived on page 26 left column down
> 
> When the K2 starts up the K2 says: 12.7 Volt I 0.32 amp
> I think it's okay?
> 
> All values appear OK
> 
> un single doubt
> 
> For U1 pin 27 I have 5.7
> For U1 pin 28 I have 5.58
> 
> But I think it's OK, okay?
>