[Elecraft] Kenwood microphone

[Nr4c]

If it's an MC-50 did you try flipping the plug to use the other impedance?  

The cable from mic to base can be inverted to change from high to low impedance. 

Sent from my iPhone
...nr4c. bill


> On Jun 27, 2017, at 4:56 AM, G4GNX <g4gnx at g4gnx.com> wrote:
> 
> Is anyone using a Kenwood MC-50 (dynamic) as a desk mic? If so, what settings are you using on the K3?
> 
> I am finding that setting FPl or FPH and tapping ‘7’, then turning the mic gain way high, is the only way to get 5 bars on the ALC. I don’t think I should need to have the extra gain switched in, which is really only for low output devices.
> 
> 73,
> 
> Alan. G4GNX
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com