[Elecraft] K3 s/n 8xxx won't do 50 W TX gain calibration

[Dick Dievendorff]

There is a CALIBRATE button press required to perform the calibration on
each page. "Next" moves to the next page, whether or not you've done the
calibration on the page you're leaving.

We need the ability to perform just the 5, 50, or 1 mW calibration without
having to perform calibrations at other power levels. I can't use "Next" to
imply "calibrate and advance".

73 de Dick, K6KR



-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Don Wilhelm
Sent: Thursday, June 8, 2017 12:24
To: brian <alsopb at comcast.net>; elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 s/n 8xxx won't do 50 W TX gain calibration

Brian,

I think that may be a K3 Utility "problem".
It has the capability to skip any of the gain calibration ranges.  Try again
and observe all the buttons on each screen.

73,
Don W3FPR

On 6/8/2017 3:12 PM, brian wrote:
> It's been a bit since I've done this.
> 
> It does the 5 watt calibration OK.
> 
> It then goes to the 50 watt calibration menu.  Hitting next doesn't do 
> any calibration but instead brings up the 1 mW calibration menu.
> 
> K3 with new synthesizers:  FW 5.57/1.26/2.88/2.88
> 
> Only thing I can recall happening since the last time it worked was 
> upgrade to 5.57 et al.




> 
> ????
> 
> de Brian/K3KO
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> donwilh at embarqmail.com
> 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to dick at elecraft.com