[Elecraft] Elecraft at mailman.qth.net

[WP4CW]

Sent from my iPhone

> On Jul 18, 2017, at 7:12 AM, Don Wilhelm <donwilh at embarqmail.com> wrote:
> 
> Tom,
> 
> Have you centered the CW signal in the CWT bargraph?  That is necessary - use auto-spot for an easy way to tune the signal to center.
> You could try narrowing the filter width to isolate that one signal.
> 
> 73,
> Don W3FPR
> 
>> On 7/17/2017 11:38 AM, Tom Parish wrote:
>> 
>> Problem: I'm not seeing any CW decoding anymore except when I manually
>> touch the paddles.
>> I can hear CW signals coming in strong but no decoding seems to be occuring
>> for them.
>> Settings:
>> MODE: CW
>> FILTER: .45
>> CWT:  on
>> Logging: On
>> Green LED is showing
>> RX Thr - I've tried from THR1-THR4 - no change
>> The "T" is showing in the lower right hand corner
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wp4cw at aol.com